This unit allows the air used for the tested components to be let out of the system while bypassing the tester’s internal circuit. This prevents malfunction or other issues to the machine caused by foreign matters such as water and oil that may be contained in the tested components.
Pressure range
| -90～-5 kPa 1 kPa～1.5MPa |
Power cables
2m
External Dimensions (mm)
FE-20：W80×D200×H75
FE-20V：W85.2×D139×H70
This unit allows the air used for the tested components to be let out of the system while bypassing the leak tester’s internal circuit. This
This unit increases the flow rate to the leak tester for pressurization in order to shorten the pressurization time and stabilize the pressure,
This unit turns on/off the valve inside the tested component exchange unit based on the control signal sent from the leak tester.
Copyright © 2010 | PT. Fukuda Technology
