Air Leak Tester：It is compatible with test pressure of up to 5MPa. Master-less air leak testing is possible.
This is an air leak tester with temperature offset function, appropriate for shortening the cooling process.
With Auto-calibration Function
FLZ-0620 series
Auto-calibration Air Leak Tester
An air-leak tester with improved leak volume precision, which converts its results based on auto-calibration for effects of environmental changes (both ambient temperature and pressure etc.)
● Improved precision of leak sensitivity through auto calibration based Flow standards
● Improved testing precision from a stabilized zero point
● Separation of the testing station (Greater homogenization of test part and sensor environments)
Basic Specifications
Pressure Range
-90kPa～990kPa
Flow Standard
[Specified Pressure]
Positive Pressure 10kPa〜800kPa G
Negative Pressure -80kPa〜-10kPa G
[Specified Flow Rate]
Positive Pressure 0.10mL/min〜200mL/min
Negative Pressure 0.10mL/min〜50mL/min
*Support is provided with special specifications when test pressure is 5-10kPa G or 800-990kPa G.
Power Source
AC100～240V 50/60Hz
Applied Current
Current Approx. 100VA
External Dimensions (mm)
Display Unit: W162×D345×H256
Test Unit: W123×D176×H221
*Excluding extruded sections
Mass
Display Unit: Approx. 7kg
Test Unit: Approx.5kg
Download materials
Other Air Leak Tester
This is a multi-purpose air leak tester. Master-less air leak testing is possible.
The latest compact air leak tester model, including linear fitting functions and touch panel control as standard.
This air leak tester detects a leak through pressure drop after applying test pressure to the inspection item.
An air pressure unit for an air leak tester used in combination with an external control device. The distance between the measuring area and the test piece can be
This is an air leak tester that unitizes only the sensor and circuit. You can combine it with a separate display unit to be installed into the automated equipment.
Air Leak Tester：Suitable for manufacturing sites such as electronic component factories, battery factories, etc.. No use specific metals such as copper and
Ideal for air leak testing of large, high-capacity, easily deformable products such as battery cases used in EVs.
Media Sosial
Copyright © 2010 | PT. Fukuda Technology