This air leak testing system is designed for use in small volume tests such as of devices under development, in preliminary experiments before introduction to mass production lines, and in sampling tests.
Target test size：2.5×2.0mm ～up to φ18.5 ×length 30mm
Judgment Level(Pa･m³/s)
▼Under test pressure of 200kPa
FL-510: 1×10⁻⁴~Large leak Large test pieces(up to φ18.5×length 30mm) *MS-511 only
FL-513: 1×10⁻⁵~Large leak、5.0×3.2mm
FL-515: 5×10⁻⁶~Large leak、 2.5×2.0、3.2×2.5mm
Channels
MS-512: 1ch
MS-522: 2ch
Power Source
AC100V±10％ Single-phase 50/60Hz
Pneumatic Pressure Source
0.6 MPa or above
External Dimensions (mm)
MS-512: W300×D505×H367
MS-522: W384×D505×H367
*Excluding extruded secctions.
Mass
MS-512: 20kg
MS-522: 30kg
This air leak test system for gross leak testing is fully automatic, including fully-automatic gross leak determination.
Fully-automatic high-precision machine optimal for reducing testing times.
12ch Spec.
0.8s/test piece Bombing 60min
Fully-automatic high-precision machine optimal for reducing testing times.
Fully-automatic Bombing/Gross/Fine Leak Test System
This leak tester is the latest model of a fully-automatic device which can be used for 1.0 x 0.8 sizes. Conveyance accuracy is improved through position correction which
A device of leak test system suited for evaluation testing (during device development, etc.)
Bench Top type air leak tester for gross leak test.
Hermeticity inspection system for relatively large device products up to 10×10 mm size or smaller.
This single unit is a combined airtightness inspection unit that
Copyright © 2010 | PT. Fukuda Technology
