accredited calibration laboratory - Page 3 of 6 - Accredited Calibration Laboratory ISO/IEC 17025

29
May

Product MSP-0101 series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product MSP-0101 series | PT Fukuda Technology

MSP-0101 series

PAT.NO.6695153

Calibrator to generate a constant flow rate

This is an air leak test equipment for checking the sealability of packaging containers.

● The integrity testing of pharmaceuticals.
● Testing is also quantified for scientific quality management.
● Test Results that are both quantitative and reproducible.
● GMP/ Validation Compatible.
● Data Integrity (DI) Compatible.
● Easy touch panel operation.
● Applicable works：Pillow packaging, Vials, Strip Package, PTP Packaging etc.
*Leakage Testing Compliant with The Japanese Pharmacopoeia and USP <1207>

Media Center Kami :

Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

29
May

Product MSQ-2000 series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product MSQ-2000 series | PT Fukuda Technology

MSQ-2000 series

We fully automate leak testing in the packaging process and eliminate packaging defects based on certain quality standards. Judgment results and operating status can be managed on the monitor screen.

Quantitative control of quality standards in leak testing process
Ensuring the quality of the drug product during its shelf life
Established evaluation standards for manufacturing processes and achieved quantitative quality assurance
Slim, space-saving design that can be connected to existing production lines
Setup changes for product type switching can be done in a short time by replacing the chamber.

Completely domestically produced, you can rest assured about maintenance and troubleshooting.
Target work: Pillow packaging, bottle containers, vials, etc.
Product deployment overseas is not supported.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

29
May

Product MSP-0102 series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product MSP-0102 series | PT Fukuda Technology

MSP-0102 series

This is an air leak test equipment for checking the sealability of packaging containers.

The integrity testing of pharmaceuticals.
Testing is also quantified for scientific quality management.
Test Results that are both quantitative and reproducible.
GMP/ Validation Compatible.
Data Integrity (DI) Compatible.
Easy touch panel operation.
Applicable works：Pillow packaging, Vials, Strip Package, PTP Packaging etc.
*Leakage Testing Compliant with The Japanese Pharmacopoeia and USP <1207>

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

27
May

Product FU series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product FU series | PT Fukuda Technology

FU series

This is a flow unit for flow rate measurement that integrates the laminar flow element and differential pressure sensor to realize compact and light application. It can be used for indicating flow rate as well as judging pressure and flow rate by connecting to the display indicator （model:MI-170）.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

27
May

Product MSZ-0701 series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product MSZ-0701 series | PT Fukuda Technology

MSZ-0701 series

This is air leak test devices that verify the airtightness and waterproof of sealed
products. This types of devices can be used on a wide range of products, such as
packaging containers and electronic devices.

● A dry, con-destructive inspection which does not immerse test pieces in water.
● Leakage rates are quantified for scientific quality managemenet.
● Air leak tests equibalent to IPX7, IPX8 waterproofing standards are possible.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

27
May

Product HDZ-0201 | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product HDZ-0201 | PT Fukuda Technology

HDZ-0201

Used to measure the overall leakage from the entire workpiece.
Atmospheric pressure chamber method in which the workpiece is covered with a chamber, tracer gas is sealed inside the workpiece, the leaking gas is deposited inside the chamber, the leaking gas is agitated and forced to circulate, and the gas concentration is measured with a hydrogen detector. After the chamber is vacunming , air is supplied into the chamber to direct the leaked gas to the hydrogen detector for highly sensitive measurment.
Compact and lightweight design that is easy to mount in the equipment. It has a structure that makes it easy to mount it close to the product or chamber.
In addition, the concentration density decomposition capability is ultra-sensitive down to 0.1 ppm (depending on setting and environmental conditions).

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

26
May

Product MSA – 0101 Series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product MSA - 0101 Series | PT Fukuda Technology

MSA-0101 series

Sealed Chamber Method （Pressure Change Leak Test Method）

This airtight testing system is designed for use in small volume tests such as of devices under development, in preliminary experiments before introduction to mass production lines, and in sampling tests.Target test piece sizes (mm): W80×D70×H50mm or smaller or Φ40×H60 or smaller.

● Hermeticity inspection equipment for small electronic components.

● Measurement method is Pressure decay method (Sealed chamber method).
● Min. detectable leak rate: 1×10⁻⁶Pa･m³/s. (*Depends on conditions, etc.)
● Target test size: W80×D70×H50mm or less.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan

#laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

26
May

Product MSX-7003 series | PT Fukuda Technnology

Admin PT Fukuda Technology Berita Comments Off

Product MSX-7003 series | PT Fukuda Technnology

MSX-7003 series

Combined air tightness tester that can perform bombing(Helium gas impregnation), gross leakage test, and fine leakage test in one unit.
Hermeticity testing is available for medium and large electronic device products, LEDs, optical devices, high-frequency devices, power semiconductors, IR sensors, electrolytic capacitors, and other products less than 10 mm square.

The transport system is designed to accommodate pallet-to-pallet, tray-to-tray, etc., depending on the product size.
The 7003 series includes not only the MSX combined airtightness tester, but also dedicated fine and gross leak testing equipment to suit your application, so please contact us.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan

#laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

26
May

Product MSZ-0900 series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product MSZ-0900 series | PT Fukuda Technology

MSZ-0900 series

(for medium-sized products)

These are devices that test for waterproof and air tightness in sealed items. These types of devices can be used on a wide range of items such as electronic devices and packaging containers.

● A dry, non-destructive inspection which does not immerse test pieces in water.
● Leakage rate are quantified for scientific quality management.
● Air leak tests equibalent to IPX7, IPX8 waterproofing standards are possible.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan

#laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

22
May

Product MSX-6110 series | PT Fukuda Technology

Admin PT Fukuda Technology Berita Comments Off

Product MSX-6110 series | PT Fukuda Technology

MSX-6110 series

This fully-automatic system conducts leak testing while controlling the bombing (Helium charge), gross leak test, and fine leak test conditions.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan

#laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi