Volumetric Calibration: Maintaining Measurement Accuracy

In an increasingly technology-dependent world, measurement accuracy is becoming increasingly important. One important aspect of maintaining this accuracy is volumetric calibration. Volumetric calibration is the process of standardizing and verifying the accuracy of volume measuring equipment, such as pipettes, drawers, and measuring cups.

 

The Importance of Volumetric Calibration

Volumetric calibration is essential in various fields, such as chemistry, biology, pharmaceuticals, and industry. Inaccurate volume measurements can result in errors in calculations, formulations, and production processes. This can not only affect product quality, but can also have an impact on safety and operational efficiency.

In addition, volumetric calibration is also required to meet regulatory requirements and industry standards. Many organizations and laboratories have strict calibration procedures in place to ensure compliance with applicable regulations.


Volumetric Calibration Process

The volumetric calibration process typically involves several steps, including:

1. Visual inspection: Inspecting the equipment to make sure there is no damage or contamination.

2. Weighing: Weighing empty and with a specific volume to calculate the actual volume.

3. Comparison with standards: Comparing measurement results with verified reference standards.

4. Adjustments and documentation: Make adjustments if necessary and document calibration results.


Volumetric calibration should be performed at regular intervals to ensure consistent measurement accuracy. The frequency of calibration may vary depending on the type of equipment, use, and industry requirements.


Benefits of Volumetric Calibration

By performing volumetric calibrations on a regular basis, organizations can reap the following benefits:

1. Guaranteed measurement accuracy

2. Compliance with industry regulations and standards

3. Increased efficiency and productivity

4. Reduction of the risk of errors and their potential consequences

5. Improvement of product quality and customer trust


Conclusion

Volumetric calibration is a key element in maintaining measurement accuracy in a variety of industries. By implementing a comprehensive calibration process, organizations can ensure data accuracy, meet regulatory requirements, and improve overall operational quality and efficiency. Investing in volumetric calibration is an important step to ensure the reliability and integrity of the work process.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

The Importance of Pressure Calibration: Maintaining System Accuracy and Reliability

In the industrial world, the accuracy of pressure measurement is a key factor to ensure the safety, efficiency and quality of operational processes. Pressure calibration is essential to ensure that measurement equipment and systems are functioning properly, providing reliable results, and meeting applicable standards and regulations. In this article, we will discuss the importance of pressure calibration, its procedure, and its benefits for various industrial sectors.

Definition and Purpose of Pressure Calibration Pressure calibration is the process of measuring and adjusting a pressure measuring instrument in order to provide accurate and reliable readings. The primary purpose of calibration is to ensure that pressure measuring equipment, such as manometers, transducers, or sensors, provides results that conform to a standard or traceable reference. This process involves comparing a measured value with a known reference value for sure.

The Importance of Pressure Calibration

1. Safety and Regulatory Compliance The accuracy of pressure measurements is essential in various industries, such as oil and gas, petrochemicals, and manufacturing, to maintain operational safety. Proper calibration ensures that the equipment is operating within specifications and meets applicable safety regulations.

2. Process Optimization and Efficiency With regular pressure calibration, the production process can be optimized, reducing waste, and improving efficiency. Accurate pressure measurement helps to make informed decisions in the adjustment of process parameters.

3. Improved Product Quality Accurate pressure calibration ensures the consistency and reliability of measurements, so as to maintain the quality of the products produced. This is especially important in industries that require tight measurement tolerances, such as the pharmaceutical and food industries.

4. Damage Detection and Prevention With periodic calibration, deviations or damage to pressure measurement equipment can be identified early. This allows for repair or replacement steps before a larger system failure occurs.


Pressure Calibration Procedure The pressure calibration process generally includes the following steps:

1. Preparation of appropriate tools and environment

2. Initial condition inspection of equipment

3. Comparison of the readings of the test tool with the reference tool

4. Adjustment or calibration of equipment as needed

5. Documentation of calibration results


Conclusion Pressure calibration is an important practice that should be carried out on a regular basis to maintain the accuracy and reliability of a pressure measurement system. Through the proper calibration process, companies can ensure operational safety, process optimization, quality improvement, and early damage detection and prevention. By understanding the importance of pressure calibration, industries can improve efficiency, productivity, and competitiveness in a competitive environment.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

Temperature Calibration: The Importance of Ensuring Measurement Accuracy

In the world of science and technology, temperature monitoring and measurement is a very important aspect. Various fields, from industry to health to research, rely heavily on accurate and reliable temperature measurements. To ensure this accuracy, the temperature calibration process is vital.

Temperature calibration is the process of adjusting or standardizing a temperature measuring instrument so that it can provide accurate readings. This is done by comparing the instrument’s readings with a well-calibrated reference standard. This process ensures that the temperature gauge can provide reliable information and be used to make important decisions.

One example of the importance of temperature calibration can be seen in the health sector. Measuring a patient’s body temperature is crucial in diagnosing and monitoring their health condition. If the thermometer used is not calibrated correctly, the diagnosis and treatment provided can be inaccurate, even dangerous for the patient. Routine temperature calibration on a medical thermometer is an important step to ensure reliable measurement results.

In an industrial context, temperature calibration is also an important requirement. For example, in manufacturing processes where temperature is a critical factor, such as in semiconductor production or food processing. If the temperature measuring device is not calibrated correctly, it can cause the resulting product to not meet the set quality standards, and can even endanger consumer safety.

In addition, in the field of scientific research, temperature calibration plays a vital role in ensuring the validity and reliability of the data collected. Accurate temperature measurements are essential in a variety of scientific experiments and observations, where the results are then used as a basis for decision-making and theory development.

Thus, it can be concluded that temperature calibration is an important process that must be carried out periodically to ensure the accuracy and reliability of temperature measurements. This has a significant impact on various fields, from health, industry, to scientific research. A commitment to consistent and regular temperature calibration will help maintain the integrity of the data and information generated, as well as support informed and informed decision-making.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

Industrial Tool Calibration: Maintaining the Accuracy and Reliability of Production Processes

Calibration of industrial tools is an important component in maintaining the quality and efficiency of the production process. In today’s competitive industrial environment, the ability to produce products with high consistency is key to maintaining competitiveness. Precise and regular calibration of production equipment can ensure that these tools function optimally, resulting in accurate and reliable output.

 

The Importance of Industrial Tool Calibration is the process of measuring and adjusting industrial equipment to conform to established standards and specifications. This process aims to verify that the tools provide accurate and reliable measurement results. Without regular calibration, these tools can experience drift or shift from reference values, resulting in inconsistent or even defective products.

In addition, calibration also plays an important role in compliance with regulations and industry standards. Many industrial sectors, such as manufacturing, pharmaceuticals, and healthcare, have strict requirements regarding measurement accuracy and strict documentation. Failure to calibrate the tool regularly can result in sanctions, fines, or even the closure of production facilities.

 

A Comprehensive Approach in Industrial Tool Calibration To achieve optimal calibration results, a comprehensive approach is required. These include:

 

1. Identify Critical Equipment: Determine the tools that are most critical to the production process and prioritize calibration on those equipment.

 

2. Documented Calibration Procedures: Develop and implement detailed and well-documented calibration procedures, in accordance with manufacturer specifications and industry standards.

 

3. Regular Calibration Schedule: Establishes a regular calibration schedule for each tool, taking into account the frequency of use, operating environment, and manufacturer’s recommendations.

 

4. Tracking and Documentation: Maintain a complete calibration record, including measurement results, adjustments made, and corrective actions taken.

 

5. Adequate Staff Training: Ensuring that the staff responsible for calibration has the necessary knowledge and skills to carry out the task correctly.

 

With this comprehensive approach, companies can ensure that their industrial tools function accurately and reliably, resulting in high-quality and consistent products.

 

Conclusion Calibration of industrial tools is a vital process in maintaining the accuracy and reliability of the production process. By implementing structured and regular calibration procedures, companies can ensure that their tools function optimally, meet regulatory requirements, and produce high-quality products. Investments in industrial tool calibration not only improve operational efficiency, but also help maintain competitiveness in an increasingly competitive market.

 

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

Different Types of Calibration You Need to Know

Different Types of Calibration You Need to Know

 

There are quite a lot of different types of calibration that you come across today. However, there are at least six types of calibration that are popular in the community. Check out the following explanation.

  1. Flow Calibration

Equipment that measures flow rates will require this type of calibration. The speed of flow is certainly highly dependent on the specific fluid moving through a hole, vessel, or pipe at any given time.

This flow calibration is quite common for turbine measuring equipment, rotameters, laminar flow meters, and so on.

 

  1. Pressure Calibration

This type is often used in various industries to measure hydraulic and gas pressure. This is important for factories and other industries because it is to monitor safety and work productivity.

Barometers and transducers are just a few examples of tools that can use pressure calibration to ensure the capability and accuracy of the tool.

 

  1. Electrical Calibration

As the name implies, this type is useful for calibrating measuring instruments with electrical parameters – including resistance, current, voltage, frequency, and so on.

To carry out this evaluation, calibration must involve a precision calibrator called UUT. Some electrical tools that require calibration include electricity meters, electricity recorders, frequency counters, and so on.

 

  1. Temperature Calibration

Some industries rely heavily on temperature reading processes. Therefore, some of these industries require temperature calibration – which must condition the environment in such a way.

Thermal cameras, infrared meters, and call thermometers are some of the tools that require temperature calibration. Calibration can only be done by comparing the standard temperature in the artificial environment with  the probe being tested.

 

  1. Mechanical Calibration

Calibration is also necessary and crucial for measuring equipment that uses conventional methods. The goal is the same, which is to maintain the performance of the tool in optimal condition. The calibration method is also relatively simpler than other types.

Some of the instruments that usually utilize this method are scales, micrometers, torque wrenches and screwdrivers, height gauges, and so on.

 

  1. Pipette Calibration

You may often encounter pipers in the laboratory. Well, this type of calibration is indeed special for pipettes and other tools in the laboratory.

From manual to electronic pipettes, everything must be calibrated regularly – and according to procedure. It is important to ensure that the pipette has a level of accuracy that matches the initial specifications.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

The Importance Of Calibration

Calibration is an application activity to determine the correctness of the value of the designation of measuring instruments and/or measuring materials. Meanwhile, according to the ISO/IEC 17025 guide, it is a series of activities that connect the values shown on the measuring instrument or measurement system, or the value of the material measured, with the values that have been determined either with the quantity measured under certain conditions.

In other words, this calibration is an activity to determine the conventional truth of the value of a measuring instrument and measuring material by comparing it with a measuring standard that has been traced to national standards or international measurements.

Calibration also includes medical equipment that is often used in hospitals and similar medical clinics. Calibration itself is important to be used in medical devices to be able to detect and correct uncertainty in making measurements and bring it to an acceptable level. As long as the level of accuracy of this medical device is very important and can affect diagnostics and can endanger patient safety.


The Objectives of the Calibration itself include:

Assurance of Results Through Measurement Systems

Calibration can be a guarantee of the results of a measurement system. With calibration, medical devices also need to be done to maintain accuracy in their measurements. The guarantee of results in the medical device measurement system is also contained in Permenkes No. 54 of 2015 concerning Testing and Calibration of Medical Devices article 24 which explains that every Medical Device used in Health Service Facilities and other Health Facilities must be tested and/or calibrated periodically by the Health Facility Testing Center or Health Facility Testing Institution.


Purpose of Medical Device Calibration to Avoid Irregularities

Calibration also ensures that medical devices avoid deviations that cause errors in the measurement process. Where this measurement process also greatly affects the diagnosis process and the patient’s life. With this calibration, it can be known how far there is a deviation between the value of the medical device measured and the reference material that has met international standards.


Ensuring the condition of the measuring instrument is maintained

The calibration process for medical devices also needs strict guidance and supervision by local and local governments. Especially coaching and supervision of testing and calibration directed to improve quality and coverage.

This supervision and coaching aims to ensure that the condition of medical devices is maintained so that the accuracy level does not decrease.


Improving the Quality of Healthcare Companies

Calibration in addition to maintaining the accuracy level of a medical device, calibration can also increase the confidence of patients who want to seek treatment at a hospital where the medical device is always calibrated regularly. This is also because the reputation of the hospital is very good and there are very few diagnostic errors due to medical devices that are rarely calibrated.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

Product ESV series | PT Fukuda Technology

ESV series

This unit turns on/off the valve inside the tested component exchange unit based on the control signal sent from the leak tester. Use this unit when the tested component has multiple measurement points.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

Product P-200 | PT Fukuda Technology

P-200

Please use for stable supply of test pressure



Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

Product EBU series | PT Fukuda Technology

EBU series


This unit allows the air used for the tested components to be let out of the system while bypassing the tester’s internal circuit. This prevents malfunction or other issues to the machine caused by foreign matters such as water and oil that may be contained in the tested components.


Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology

Product R-5 | PT Fukuda Technology

P-049-P-901+S-A-012-4

A highly accurate pressure/flow-rate control is possible. It is useful for testing valve performance, etc.

Selengkapnya di

Media Center Kami :
Whatsapp : 0852-8043-3389
Facebook : PT Fukuda Technology
Intagram : fukudatechnology
Twitter : Fukuda Technology
Tiktok : PT Fukuda Technology
Youtube : FUKUDA TECHNOLOGY OFFICIAL

www.fukuda-id.com

#ptfukudatechnology #fukudatechnology #kalibrasimedis #kalibrasiindustri #institusipengujiandankalibrasialatkesehatan #laboratoriumkalibrasi #LaboratoriumPengujian #laboratoriumkalibrasi

Please feel free to contact us for any inquiry.

Media Sosial

Copyright © 2010 | PT. Fukuda Technology